Quantum_Man
New Member
So I took some pictures while I was building my first PC from scratch.
Here are the boxes shortly after they were delivered.
These are all the components of the PC excluding the case.
Here's the case on its own, empty.
First step is setting up the motherboard!
My new toasty Intel Core 2 Duo E6750 2.66GHz processor!
I've now installed the CPU fan/heatsink and the RAM. The fan is 90 degrees off however, it's supposed to blow the air out the back of the PC not upwards.
Fully assembled and with the CPU fan in the correct orientation now.
The front panel with the door open, 1 DVD+/-RW and 1 DVD-ROM drive, and 1 multicard reader.
Here are the boxes shortly after they were delivered.

These are all the components of the PC excluding the case.

Here's the case on its own, empty.

First step is setting up the motherboard!

My new toasty Intel Core 2 Duo E6750 2.66GHz processor!

I've now installed the CPU fan/heatsink and the RAM. The fan is 90 degrees off however, it's supposed to blow the air out the back of the PC not upwards.

Fully assembled and with the CPU fan in the correct orientation now.

The front panel with the door open, 1 DVD+/-RW and 1 DVD-ROM drive, and 1 multicard reader.
